پلی پروپیلن ZH422H یک پلی پروپیلن هموپلیمر جهت تولید فیلمهای جهت یافته می باشد. مواد 422H به دلیل شفافیت بالا جهت تولید فیلم های جهت یافته تک لایه و چند لایه و فیلم های متالایز مناسب است.
پلیپروپیلن هموپلیمر با اینکه استحکام کششی و سختی بالاتری نسبت به پلیپروپیلن کوپلیمر دارد ولی نقطه ضعف اصلی آن مقاومت ضربهای آن است. در واقع پلیپروپیلن هموپلیمر شکنندهتر از پلیپروپیلن کوپلیمر است.
این ضعف بیشتر در دماهای پایین و به ویژه زیر صفر خود را نشان میدهد .
پلیمر، ترموپلاستیک، پلی پروپیلن هموپلیمر (PP-homo)
شفافیت بالا
تولید فیلم های جهت یافته تک لایه و چند لایه و فیلم های متالایز
Technical Datasheet PP ZH422H
Product Description:
ZH422H has been developed for coextrusion lines with a very high output and linear speed. The product allows an outstanding extrusion stability and thickness variation control. Especially on cascade lines the product provides also a very high drawability and readiness to a two way orientation. The formulation of additives is specially designed for production of BOPP films to be metallized. Metallized BOPP films produced with ZH422H feature good mechanical properties, high impact strength and puncture resistance even at low temperatures. The films form an excellent barrier against moisture, odors, oil, fats oxidation and feature high transparency, high gloss and good printability after corona treatment.
Applications:
Coextruded film with a thickness of 20 to 40 microns is used for the automatic packaging of bakery products, snacks and pasta as well as for the overwrapping of boxes and cigarette packets.
Typical data:
Property | Test method | Unit | value |
---|---|---|---|
Melt Flow Rate (230°C/2.15kg) | ASTM D1238 | gr/10 min | 2 |
Vicat Softening Point(9.8N) | ASTM D1525 | °C | 154 |
H.D.T(0.48MPa) | ASTM D648 | °C | 92 |
Flexural Modulus | ASTM D790 | MPa | 1550 |
Tensile Strength at Yield | ASTM D638 | MPa | 35 |
Elongation at Yield | ASTM D 638 | % | 12 |
Izod impact Strength/9notched) at 23°C | ASTM D 256 | J/m | 60 |
Rockwell Hardness | ASTM D785 | R-B | 102 |