پلی پروپیلن X30S یک پلی پروپیلن هموپلیمر با شاخص مذاب متوسط میباشد. مواد X30S جهت تولید الیاف و فیلم پلیپروپیلن مورد استفاده قرار میگیرد.
قابل پلیپروپیلن هموپلیمر به دلیل تبلور بالا و مقاومت ضربهای پایین گزینه بسیار مناسبی برای کاربردهای نساجی و یا ورقها و فیلمهای نازک است. در این نوع کاربردها بیشتر به استحکام کششی نیاز است و ضعف مقاومت ضربهای اهمیتی ندارد. فیلمهای کشش یافته از دو جهت و الیاف پروپیلن و انواع گونی و تسمه و ... از جمله کاربردهای پلیپروپیلن هموپلیمر است.
پلیمر، ترموپلاستیک، پلی پروپیلن هموپلیمر (PP-homo)
قابلیت پردازش عالی و ویژگی های نوری برجسته
فیلم بسته بندی گل، کتاب، لوازم التحریر، پتو، پیراهن، لباس بافتنی و جوراب، همچنین برای اکستروژن لوله های کوچک و نی های نوشیدنی بسیار مناسب است.
Technical Datasheet pp X30S
Product Description:X 30 S is a homopolymer particularly suited for the extrusion of cast and water quenched blown film. X 30 S is formulated with a general purpose stabilisation package and does not contain any slip or antiblocking agents.
X 30 S exhibits excellent pcocessability and outstanding optical properties. This makes X 30 S particularly suitable for film for packaging food-stuffs such as pasta, snacks, biscuits, bakery products and confectionery.
Other applications include film for packaging for flowers, books, stationery, blankets, shirts, Knitwear and hosiery. X 30 S is also very appropriate for the extrusion of small pipes and drinking straws.
X 30 S can be used for lamination with polyester, polyamide and aluminium for packaging of snacks, crisps, sweets, coffee, meat products and pre-cooked foods.
In these applications, X 30 S gives an excellent high gloss finish in laminates and exhibits good printability after Corona treatment.
X 30 S can also be coextruded with heterophasic copolymer grades to produce high gloss finishes on blow moulded pigmented bottles and coextruded sheet.
Heavy duty jumbo bags,Furniture,Caps,Closures,Toys
Typical data:Property | Test method | Unit | value |
---|---|---|---|
Density | ISO 1183 | g/cm3 | 0.9 |
Melt index (190°C/2.16 kg) | ISO 1133 | dg/min | 9 |
Flexural Modulus | ISO 178 | N/mm2 | 1500 |
Tensile Strength at Yield | ISO R 527 | N/mm2 | 34 |
Elongation at Yield | ISO R 527 | % | 13 |
Izod Impact Strength (notched) at 23 ºC | ISO 180 | kJ/m2 | 4 |
Hardness Shore D | ISO 868 | points | 71 |
Vicat softening point (9.8 N) | ISO 306/A | °C | 155 |
H.D.T. (0.46 Mpa) | ISO 75/B | °C | 115 |
Accelerated oven ageing in air at 150 ºC | ISO 4577 | hours | 360 |
Haze | MTM 17031 | % | 1 |
Gloss (45 ºC) | MTM 17021 | % | 85 |