پلی پروپیلن CR380 یک پلیپروپیلن هموپلیمر است که بیشتر در نساجی بویژه در تولید منسوجات بیبافت کاربرد دارد.
پلیپروپیلن هموپلیمر با اینکه استحکام کششی و سختی بالاتری نسبت به پلیپروپیلن کوپلیمر دارد ولی نقطه ضعف اصلی آن مقاومت ضربهای آن است.
پلیپروپیلن هموپلیمر به دلیل تبلور بالا و مقاومت ضربهای پایین گزینه بسیار مناسبی برای کاربردهای نساجی و یا ورقها و فیلمهای نازک است. در این نوع کاربردها بیشتر به استحکام کششی نیاز است و ضعف مقاومت ضربهای اهمیتی ندارد. فیلمهای کشش یافته از دو جهت و الیاف پروپیلن و انواع گونی و تسمه و ... از جمله کاربردهای پلیپروپیلن هموپلیمر است.
پلیمر، ترموپلاستیک، پلی پروپیلن هموپلیمر (PP-homo)
میزان جریان ذوب بالا با توزیع وزن مولکولی باریک
برای پارچه های غیر بافته شده برای پوشک، کاربردهای بهداشتی، پزشکی، پارچه های محافظ برای کاربردهای کشاورزی، صنعتی و پزشکی مناسب است.
Technical Datasheet CR 380
Product Description:
″ P-CR- 380″ is a high melt flow rate homo-polymer polypropylene with a narrow molecular weight distribution for the high speed production of low denier continuous filament for spunbonded,nonwoven fabrics with an excellent balance of mechanical properties and softness.
″ P-CR- 380″ is formulated with an anti-gasfading stabilization package and characterized by consistent high speen and low nonwoven weights.
″ P-CR- 380″ is suitable for nonwoven fabrics for diapers, medical-sanitary applications, protective fabrics for agricultural, industrial and medical applications.backing and linings for the furniture and carpet industries.
″ P-CR- 380″ can also be used for the production of partially oriented yarn and bulked continuous filament.
″ P-CR- 380″ is suitable for food contact.
Applications:
Spunbonded,Nonwoven fabrics
Fabrices for diapers, medical-sanitary applications
Protective fabrics for agricultural, industrial and medical applications
Wipes and tissues
Bulk continuous filament and Oriented yarn
Backing and linings for the furniture and carpet industries.
Nonwoven staple fiber
Typical data:
Property | Test method | Unit | value |
---|---|---|---|
Melt Flow rate (230 ºC, 2.16 kg) | ASTM D1238 | g/10min | 35-40 |
Density | ASTM D1505 | g/cm3 | 0.9 |
Flexural Modulus | ASTM D790 | MPa | 1500 |
Tensile Strength at Yield | ASTM D638 | MPa | 33 |
Tensile Elongation at Yield | ASTM D638 | % | 8 |
Izod Impact Strength (notched) at 23 ºC | ASTM D256 | J/m | 30 |
Vicat softening point (10 N) | ASTM D1525 | °C | 155 |
H.D.T. (0.46 Mpa) | ASTM D648 | °C | 91 |